Fujitsu LIFEBOOK E4411 Скачать руководство пользователя

Страница: 83 / 93

Troubleshooting and tips

The notebook stops working

Notebook

Energysaving mode

Cause

Troubleshooting

Notebook is in energy saving mode.

►

Leave energy saving mode.

An application programme has caused the
malfunction.

►

Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).

The battery is dead.

►

Charge the battery.

►

Insert a charged battery.

►

Connect the mains adapter to the
notebook.

The printer does not print

Printerdoesnotprint

Cause

Troubleshooting

The printer is not switched on.

►

Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).

The printer is not connected correctly.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

►

Check whether the correct printer driver is
loaded (refer to the printer documentation).

The wireless connection to a network does not work

Thewireless connectiontoanetwork does notwork

Cause

Troubleshooting

The wireless component is disabled.

►

Switch the wireless component on (see

"Switching the wireless components on and
off", Page 45

The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.

►

Check whether the wireless connection is
switched on via the software.

►

Further information on using the wireless
component can be found in the help

les.

Fujitsu

Содержание LIFEBOOK E4411






























































































Результаты поиска

Содержание LIFEBOOK E4411

Отзывы:

Похожие инструкции для LIFEBOOK E4411

Бренды по названию

Популярные бренды

Fujitsu LIFEBOOK E4411, Руководство по эксплуатации

Результаты поиска

Содержание LIFEBOOK E4411

Отзывы:

Похожие инструкции для LIFEBOOK E4411

Бренды по названию

Популярные бренды