Fujitsu LIFEBOOK E4411, Руководство по эксплуатации

Страница: 58 / 93

Security functions
Protecting BIOS Setup Utility (supervisor and user password)
If you have opened these operating instructions on the screen, we
recommend that you print them out. You cannot call the instructions onto
the screen while you are setting up the password.
BIOS SetupUtility
The supervisor password and the user password both prevent unauthorised use of the BIOS Setup
Utility . With the aid of the supervisor password you can access all of the functions of the BIOS
Setup Utility , while the user password will only give you access to some of the functions. You
can only set up a user password if a supervisor password has already been assigned.
Please refer to section "Settings in BIOS Setup Utility", Page 70 for a description
of how to call up and operate the BIOS-Setup-Utility .
Assigning the supervisor and user passwords
► Start the BIOS Setup Utility and go to the Security menu.
► Select the Set Supervisor Password fi eld and press the Enter key.
With Enter new Password : you are asked to enter a password.
► Enter the password and press the Enter key.
Con fi rm new Password requires you to con fi rm the password.
► Enter the password again and press the Enter key.
Changes have been saved
is a con fi rmation that the new password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when con fi guring the supervisor password.
If you do not want to change any other settings, you can exit BIOS Setup Utility .
► In the Exit menu, select the option Save Changes & Exit .
► Select
Yes
and press the Enter key.
Password Supervisorpassword Userpassword
The notebook is then rebooted and the new password comes into effect. It will now be necessary
to
fi rst enter your supervisor or user password in order to open the BIOS Setup Utility . Please
note that the user password only provides access to a few of the BIOS settings.
Changing the supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the supervisor password.
Password Supervisorpassword Userpassword
► Call the
BIOS Setup Utility
and go to the
Security
menu.
► When changing the password, proceed exactly as for password assignment.
54 Fujitsu