Fujitsu LIFEBOOK E4411 Скачать руководство пользователя

Страница: 27 / 93

Working with the notebook

Indicator

Description
Power-on indicator/Standby

Standbyindicator

Power-onindicator

•

Indicator is illuminated: The notebook is switched on.

•

Indicator

ashes: The notebook is in standby mode.

•

Indicator is off: The notebook is switched off.

Battery charging indicator/power connector

The state of charge of the battery is shown by the battery indicator.

•

The indicator lights up white: The battery is charged or no battery is inserted.

•

The indicator lights up orange: the mains adapter is connected and the battery
is being charged.

•

Indicator

ashes orange: the mains adapter is connected but the battery cannot

be charged as the battery is too hot or cold for charging. The charging process
is continued as soon as the battery reaches a permissible temperature again.

•

Indicator

ashes red: An error has occured.

•

The indicator is not illuminated: the mains adapter is not connected.

Batterystatusindicator

Batterysymbol

Batteryindicator

Battery indicator

•

The indicator lights up white: The battery charge is between 51% and 100%
of its maximum.

•

The indicator lights up orange: The battery charge is between 13% and 50%
of its maximum.

•

The indicator lights up red: The battery is charged to between 0% and 12% of
its maximum capacity.

•

Indicator

ashes red: An error has occured.

Drive indicator

Drive

Indicator

The indicator is lit: The memory modules are being accessed.

Radio components indicator

•

Indicator is illuminated: The wireless components are switched on.

•

Indicator is off: The wireless components are switched off.

F Lock indicator

Indicator

FLock

The indicator lights up: The key combination

has been pressed.

Instead of the imprinted standard functions of the function keys, the Fn functions
can be executed by pressing the keys directly (see chapter

"Function keys and

key combinations", Page 29

Num Lock indicator

Indicator

NumLock

Indicator is illuminated: The

Num

key has been pressed. The virtual numerical

keypad is activated. You can output the characters indicated on the upper right of
the keys.

Fujitsu

Содержание LIFEBOOK E4411






























































































Результаты поиска

Содержание LIFEBOOK E4411

Отзывы:

Похожие инструкции для LIFEBOOK E4411

Бренды по названию

Популярные бренды

Fujitsu LIFEBOOK E4411, Руководство по эксплуатации

Результаты поиска

Содержание LIFEBOOK E4411

Отзывы:

Похожие инструкции для LIFEBOOK E4411

Бренды по названию

Популярные бренды