Fujitsu FUTRO S9011, Руководство по эксплуатации, Страница: 19 / 36

Getting started
Vertical operating position
Verticaloperatingposition Operatingposition,vertical basefoot Sidecover
If you want to operate the unit in a vertical position, use the foot for the
vertical operating position supplied with the unit.
Attach the foot only to the side of the device shown in the fi gures.
If connecting many cables to the device, ensure that the device is in a stable
position, in order to prevent it from toppling over.
Proceed as follows to prepare the device for the vertical operating position:
► Disconnect the cables if required.
► Lay the device on its top (narrow side) as shown, on a stable, fl at and clean surface.
1
3
3
2
2
► Place the foot on the housing (1). Make sure that you align the 2 latches (2) on
the foot with the corresponding holes on the housing.
► Fix the foot with the screws (3).
Fujitsu 15