manualshive.com logo in svg

Fujitsu fi-8150, Руководство оператора

Поделиться
Скачать
Fujitsu fi-8150 Скачать руководство пользователя страница 42

HINT

When operating scanners with PaperStream NX Manager, you need to set up an environment and configure
settings for PaperStream NX Manager.
For details, refer to the PaperStream NX Manager User's Guide.
The PaperStream NX Manager User's Guide can be downloaded from the following web page:

https://www.fujitsu.com/global/support/products/computing/peripheral/scanners/fi/manuals/

 

Overview of the Bundled Software

This section describes the software that is required for the computer you want to connect the scanner to.
This product is bundled with the following software.

HINT

The software can be installed from the bundled Setup DVD-ROM or downloaded from the download site and
then installed.

 

●

PaperStream IP driver
The PaperStream IP driver is a scanner driver that conforms to the TWAIN/ISIS standard. It supports scanners
connected to a network.
There are three types of PaperStream IP drivers.

-

PaperStream IP (TWAIN)
Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant 32-bit
applications.

-

PaperStream IP (TWAIN x64)
Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant 64-bit
applications.
Regardless of your operating system, if the image scanning application that you are using is a 32-bit
application, use PaperStream IP (TWAIN).

-

PaperStream IP (ISIS) fi-8000 Series
Conforms to the ISIS standard. Used when you operate the scanner using ISIS-compliant applications.

For details, refer to the PaperStream IP driver Help.

●

Network Setup Tool for fi Series
The following applications are included.
These applications are used to connect the scanner to a network to make the scanner available.

-

Scanner Selection Tool
Use this application to set a computer to be able to use the scanner connected to a network.

-

IP Address Setting Tool
Use this application to set a scanner's IP address and scanner name.

-

Button Event Manager
Use this application to specify an image scanning application to be launched when the button on the
scanner is pressed.

Scanner Setup

42

Содержание fi-8150



















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды