manualshive.com logo in svg

Fujitsu fi-8150, Руководство оператора

Поделиться
Скачать
Fujitsu fi-8150 Скачать руководство пользователя страница 289

Also, check that there is no error or malfunction on the network device.
For errors that occur on the network device, refer to the manual of your network device.

●

Is the firmware version for the network device the latest?

Solution

If the firmware version for the network device is not the latest, unexpected operations may occur.
Contact the network administrator to check the firmware version, and consider updating it to the latest
version.
For details about how to update the firmware for the network device, refer to the manual of your network
device.

●

Is the computer connected to a network device (such as a switch, a hub, or a router)?

Solution

Connect the computer to a network device (such as a switch, a hub, or a router).
For details, refer to the manual of your computer.

●

Did you configure the settings related to communication conditions on a network device (such as a switch,
a hub, or a router)?

Solution

When the following are set on the network device (such as a switch, a hub, or a router), take measures
accordingly.

●

Protocol filter function is enabled.
Allow the protocol which is to be used for communication.

●

MAC address filtering is enabled.
Configure the network device (such as a switch, a hub, or a router) with the MAC address of the scanner.
You can check the MAC address of the scanner as follows.

-

For fi-8190/fi-8290/fi-8170/fi-8270
The MAC address of the scanner can be checked using one of the following methods.

●

The MAC address of the scanner can be checked in [1: Scanner Information] on the [Settings Menu]
screen of the operator panel.
For details, refer to 

How to Use Settings Menu (page 146)

.

●

The MAC address of the scanner can be checked by using IP Address Setting Tool.
For details, refer to the Network Setup Tool for fi Series Help.
For details about how to start up IP Address Setting Tool, refer to 

Starting Up IP Address Setting Tool

[fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250] (page 71)

.

-

For fi-8150/fi-8250
The MAC address of the scanner can be checked by using IP Address Setting Tool.
For details, refer to the Network Setup Tool for fi Series Help.
For details about how to start up IP Address Setting Tool, refer to 

Starting Up IP Address Setting Tool

[fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250] (page 71)

.

For the settings on the network device, refer to the manual of your network device.

Troubleshooting

289

Содержание fi-8150



















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды