manualshive.com logo in svg

Fujitsu fi-8150, Руководство оператора

Поделиться
Скачать
Fujitsu fi-8150 Скачать руководство пользователя страница 278

Example:

Outside of the document may have been scanned because the scanned document is shorter than the specified
paper size.
In this case, take one of the following measures, and then scan again.

●

Load a document of the specified paper size in the ADF paper chute (feeder).

●

Change the scan settings so that the scanning area is set inside of the document.

ATTENTION

Ways to designate the scanning area differ depending on scanner drivers and image scanning applications.
For details, refer to the help for your scanner driver and the manual/help for your image scanning
application.

 

Imprinting Area Error (When the Imprinter Is Installed) [fi-8190/fi-8170/fi-8150/
fi-8150U]

If an error occurs with the print start position in the imprinter, the following is displayed on the operator panel.

●

For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.

Troubleshooting

278

Содержание fi-8150



















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды