manualshive.com logo in svg

Fujitsu fi-8150, Руководство оператора

Поделиться
Скачать
Fujitsu fi-8150 Скачать руководство пользователя страница 257

Error Code

Error Details (displayed in the Error Recovery Guide window)

E0

Flatbed carrier error

Check that the transport lock switch is not locked.
If the the transport lock switch is locked, unlock the transport lock switch.
For details, refer to 

Transport Lock Error [fi-8290/fi-8270/fi-8250/fi-8250U] (page 274)

.

If the problem still persists, write down the error code, check each item in 

Before You Contact the Scanner

Service Provider (page 330)

 and then contact the distributor/dealer where you purchased this product. Refer to

the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.

Optical Error (Flatbed) [fi-8290/fi-8270/fi-8250/fi-8250U]

If an optical error occurs in the flatbed, the following is displayed on the operator panel.

●

For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.

Error Code

Error Details and the Solution

E1:7E

E1:7E Error
Optical error (flatbed)
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.

●

For the Function Number Display
An alphabetical character and a number for the error code are displayed alternately on the Function Number
Display.

Error Code

Error Details (displayed in the Error Recovery Guide window)

E1

Optical error (flatbed)

Take the following measures.

●

Check that the transport lock switch is not locked.
If the the transport lock switch is locked, unlock the transport lock switch.
For details, refer to 

Transport Lock Error [fi-8290/fi-8270/fi-8250/fi-8250U] (page 274)

.

●

Refer to 

Cleaning the Inside of the Scanner (Flatbed) [fi-8290/fi-8270/fi-8250/fi-8250U] (page 229)

 and

clean the document bed (glass section).

●

Turn the scanner off then back on.

If the problem still persists, write down the error code, check each item in 

Before You Contact the Scanner

Service Provider (page 330)

 and then contact the distributor/dealer where you purchased this product. Refer to

the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.

Troubleshooting

257

Содержание fi-8150



















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды