manualshive.com logo in svg

Fujitsu FI-800R, Руководство оператора, Страница: 93 / 205

Поделиться
Скачать
Fujitsu FI-800R Скачать руководство пользователя страница 93

Cleaning the Carrier Sheet/Photo Carrier Sheet/Booklet Carrier Sheet

The Carrier Sheet/Photo Carrier Sheet/Booklet Carrier Sheet should be cleaned with either a piece of dry cloth, a
cloth moistened with Cleaner F1/mild detergent, or a sheet of Cleaning Wipe.
Gently wipe dirt and dust off the surface and the inside of the Carrier Sheet/Photo Carrier Sheet/Booklet Carrier
Sheet.
As you keep using the Carrier Sheet/Photo Carrier Sheet/Booklet Carrier Sheet, dirt and dust will accumulate on
the surface and the inside.
Clean it regularly because it may result in scanning errors.

ATTENTION

●

Make sure that the Carrier Sheet/Photo Carrier Sheet/Booklet Carrier Sheet is not creased.

●

To avoid deformation and discoloration, never use paint thinner or any other organic solvents.

●

Do not use force to rub against the Carrier Sheet/Photo Carrier Sheet/Booklet Carrier Sheet because doing
so may cause damage or deformation.

●

After cleaning the inside of the Carrier Sheet/Photo Carrier Sheet/Booklet Carrier Sheet with a cloth
moistened with Cleaner F1/mild detergent or a sheet of Cleaning Wipe, do not close the Carrier Sheet/
Photo Carrier Sheet/Booklet Carrier Sheet until it is completely dry.

●

The Carrier Sheet and Photo Carrier Sheet should be replaced approximately every 500 scans.
The Booklet Carrier Sheet should be replaced approximately every 2,500 scans.
For information on purchasing the Carrier Sheets/Photo Carrier Sheets/Booklet Carrier Sheets, contact the
distributor/dealer where you purchased this product. Refer to the contact information in the Contact List if
supplied with this product, or refer to the contact information in the Contact for Inquiries section if
provided in Safety Precautions supplied with this product, and then make an inquiry.

 

Daily Care

93

Содержание FI-800R














































































































































































































Отзывы:

Нет отзывов