Fujitsu FI-800R Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 205

Fujitsu FI-800R Скачать руководство пользователя страница 9

Symbols Used in This Manual

The following indications are used in this manual to obviate any chance of accident or damage to you, people
near you, and your property.
Warning labels consist of a symbol indicating the severity and a warning statement.
The symbols and their meanings are as follows.

WARNING

This indication alerts operators of an operation that, if not strictly observed, may result
in severe injury or death.

CAUTION

This indication alerts operators of an operation that, if not strictly observed, may result
in safety hazards to personnel or damage to the product.

For notational convention, the following symbols are used in this manual:

ATTENTION

This symbol alerts operators to particularly important information. Be sure to read this information.

HINT

This symbol alerts operators to helpful advice regarding operations.

Introduction

9

«
...
7
8
9
10
11
...
»

Содержание FI-800R














































































































































































































Отзывы:

Нет отзывов