Fujitsu FI-800R Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 205

Fujitsu FI-800R Скачать руководство пользователя страница 23

About the LED Indicator

Indication

Description

Green (lit)

Ready to start scanning.
Indicates that the initialization was successfully completed.

Green (flashing)

Indicates that the scanner enters power saving mode.
If the scanner is not operated for the length of time that is set for
the sleep interval, it enters power saving mode.

Orange (lit)

Indicates that a recoverable error occurred during scanning.
For details about errors, refer to

Errors (page 105)

.

Orange (flashing)

Indicates that a device error occurred during initialization or
scanning.
For details about errors, refer to

Errors (page 105)

.

When this error occurs, turn the power off then back on.
If the indication continues to appear after turning the power
back on, contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if
supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.

Scanner Overview

23

«
...
21
22
23
24
25
...
»

Содержание FI-800R














































































































































































































Отзывы:

Нет отзывов