Fujitsu FI-800R Скачать руководство пользователя страница 17

Страница: 17 / 205

Parts and Functions

This section shows the names of the scanner parts.

●

Front Side

No.

Name

Function

ADF (Automatic Document Feeder)

Pulls and feeds the documents one sheet at a time from
the return path opening or the ADF paper chute (feeder).
Open this to replace consumables or to clean the inside of
the scanner.

Chute extension

Pull out to adjust to the document length.

ADF paper chute (feeder)

Open the ADF paper chute (feeder) to load a document in
it.
There is an opening on the bottom of the ADF paper chute
(feeder).

Side guide

Positions the documents in place when the documents are
loaded in the ADF paper chute (feeder) as they are fed into
the scanner.

Stacker

Stacks up the ejected documents.

Scanner Overview

Содержание FI-800R














































































































































































































Результаты поиска

Содержание FI-800R

Отзывы:

Fujitsu FI-800R, Руководство оператора, Страница: 17 / 205

Результаты поиска

Содержание FI-800R

Отзывы: