Fujitsu FI 6140 - Document Scanner Скачать руководство пользователя страница 83

Страница: 83 / 226

3.6 Saving Scanned Images in PDF Format

7. From the [File] menu, select [Save As] or [Save] to save the scanned images.

For details on the operation of Adobe Acrobat, refer to Adobe Acrobat Help.

HINT

If you save scanned document images as described above, the file size may increase greatly. To reduce the

file size, save images following the procedure below. (It may take more time than you save as described

above.)

1. Select [File]

→

[Print].

2. In the dialog box below, select [Adobe PDF] from the [Name] drop-down list.

file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/03/c03_06_01.htm (8/10) [2008/10/30 12:42:00]

Содержание FI 6140 - Document Scanner



































































































































































































































Результаты поиска

Содержание FI 6140 - Document Scanner

Отзывы:

Fujitsu FI 6140 - Document Scanner, Руководство оператора, Страница: 83 / 226

Результаты поиска

Содержание FI 6140 - Document Scanner

Отзывы: