Fujitsu FI-6130 Скачать руководство пользователя

Страница: 152 / 222

6.1 Removing Jammed Documents

fi-6130 / fi-6230 Image Scanner Operator's Guide

TROUBLESHOOTING

CONTENTS MAP

TOP

6.1 Removing Jammed Documents

If a document jam occurred, follow the procedure below to remove the jammed documents.

ATTENTION

●

Take care not to get injured when removing jammed documents.

●

Be careful not to get neckties, necklaces, etc. entangled in the scanner when

removing the jammed documents.

●

The surface of the glass and guides may become hot during operation. Take care not

to get burned.

1. Remove any documents on the ADF paper chute.

2. Open the ADF by pulling the ADF open lever and turning the ADF to the front.

ADF open lever

CAUTION

Be careful, the ADF may close and pinch your finger.

3. Remove the jammed document.

ATTENTION

●

Staples, paper clips, etc. cause document jams. Be sure to fully check the document

and feed path, and remove any small metal objects such as these.

Also, before you start scanning, be sure to remove any staples, clips, etc. from the

document.

●

In case you have scanned stapled or clipped documents, do not pull them out

forcibly. Otherwise, the glass and/or guides may be damaged.

4. Press down on the center of the ADF to return it to its original position and lock the ADF open

lever.

file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/06/c06_01_01.htm (1/2) [2008/10/30 15:14:47]

Содержание FI-6130































































































































































































































Результаты поиска

Содержание FI-6130

Отзывы:

Похожие инструкции для FI-6130

Бренды по названию

Популярные бренды

Fujitsu FI-6130, Руководство оператора

Результаты поиска

Содержание FI-6130

Отзывы:

Похожие инструкции для FI-6130

Бренды по названию

Популярные бренды