Fujitsu FI-6130 Скачать руководство пользователя

Страница: 12 / 222

Safety Precautions (2)

fi-6130 / fi-6230 Image Scanner Operator's Guide

TROUBLESHOOTING

CONTENTS MAP

TOP

Safety Precautions (2)

3 4

WARNING

Do not use the scanner if there is a strange odor.

If you detect heat coming from the device or detect other problems such as smoke, strange smells or

noises, immediately turn off the scanner and disconnect its power plug. Make sure that any smoke

coming from it has stopped, before contacting the store where you bought the scanner or an

authorized FUJITSU scanner service provider.

Turn the scanner OFF if it is damaged.

If the scanner is damaged for any reason, turn the scanner off and unplug the power cable. Contact

the store where you purchased the scanner or an authorized scanner service provider.

Do not put liquids inside the scanner.

Do not insert or drop metal objects in to the scanner. Do not scan wet documents or documents with

paper clips or staples. Do not splash or allow the scanner to get wet.

If foreign objects (water, small metal objects, liquids, etc.) get inside the scanner, immediately turn

off the scanner and disconnect the power plug from the power outlet. Then, contact the store where

you bought the scanner or an authorized FUJITSU scanner service provider. Pay particular attention

to this warning in households where there are small children.

Unplug the scanner when a trouble occurs.

Immediately unplug the scanner when a trouble occurs.

Never cut the ground connection until the scanner is unplugged from the power outlet.

Do not touch the inside of the scanner unless necessary.

Do not take apart or modify the scanner. The inside of the scanner contains high-voltage

components. Touching these components might cause electric shock or fire.

Do not use aerosol sprays near the scanner.

Do not use any aerosol sprays or alcohol based sprays to clean the scanner. Dust blown up by strong

air from the spray may enter the inside of the scanner. This may cause the scanner to fail or

malfunction. Sparks, caused by static electricity, generated when blowing off dust and dirt from the

outside of the scanner may cause a fire.

file:////10.232.227.50/Manual/fi-6130_6230_Lynx...OG/R02/02_081030/contents/EN/cReg/cReg04_02.htm (1/2) [2008/10/30 15:15:43]

Содержание FI-6130































































































































































































































Результаты поиска

Содержание FI-6130

Отзывы:

Похожие инструкции для FI-6130

Бренды по названию

Популярные бренды

Fujitsu FI-6130, Руководство оператора

Результаты поиска

Содержание FI-6130

Отзывы:

Похожие инструкции для FI-6130

Бренды по названию

Популярные бренды