Fujitsu fi-5650C, Руководство по началу работы

Страница: 39 / 40

AP-9
Appendix 3 Replacing
Consumables
The following table shows the specifications
of consumables and guidelines for the
replacement cycle.
* A set of two rollers.
For purchase of consumables, contact the store
where you purchased the scanner or an autho-
rized FUJITSU scanner service provider.
The replacement cycles above are rough
guidelines for the case of using A4/Letter
woodfree or wood containing paper 64 g/m2
(17 lb). This cycle varies according to the type
of the used paper and how frequently the
scanner is used and cleaned.
The following pictures shows the locations of
the parts to be replaced. Refer to "Chapter 4
Replacing Consumables" fi-5650C Operator's
Guide on User Manual CD-ROM.
CAUTION
The glass of the inside of the
ADF becomes hot during opera-
tion.
When you clean the inside of
the scanner, turn OFF the power
and unplug the AC cable from
the outlet and wait for at least
three minutes.
Consumables and
Replacement Cycle
TABLE 6.
Description Part No.
Standard
Replacement
Cycle
Brake Roller PA03338-K010 After 250,000
scans or one
year.
Pick Roller* PA03338-K011 After 250,000
scans or one
year.
ATTENTION
Use only the specified consumables.
Pick Roller Set
Brake Roller