Fujitsu fi-5650C, Руководство по началу работы, Страница: 14 / 40

1-2
1.1 Checking the contents of
scanner package
When you unpack the scanner package, make sure
that the package contains all the parts on the list
included in the package.
If any parts are missing or defective, contact your
sales representative. Handle the scanner and
accessories with care.
1.2 Names and functions of
parts
This section describes the names of parts and their
functions .
TABLE 1.
No. Name Function
1 Operator Panel This panel consists of a
Function No. display,
four operating push
buttons and a LED.
Operation can be
conducted from either of
two sides of the scanner.
Can be closed and
compactly stored when
not in use.
2 ADF Paper
Chute
Holds in place the
document pages / sheets
that feed into the ADF.
3 ADF Paper
Chute
Extension
Please pull out when
scanning a long size
sheet.
4 Side Guide It is adjusted to the width
of the paper in order not
to scanned skewed pages.
5 Side guide
button
Used for adjusting the
side guides.
6 ADF Button Press this button to open
the ADF.
7 ADF
(Automatic
Document
Feeder)
It transports a document
to the reading position
automatically.
8 Stacker Scanned documents are
ejected from the ADF
onto this tray. It is
possible to change the
height.
9 Stacker
Extension /
Stopper
Pull out and set the
stopper to the paper
length.
TABLE 2.
No. Name Function
10 SCSI Interface
Connector
Used for connecting a
SCSI interface cable
from a PC.
11 SCSI ID
Switch
Used for setting SCSI ID
(The setting at the factory
shipment is ID=5).
TABLE 1.
No. Name Function