Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner, Руководство оператора

Страница: 91 / 181

3.6 Changing Carrier Sheet Settings
ScanSnap fi-5110EOX2 Operator's Guide
73
Basic Scanner Oper
ations
3
Mode
Specifies the scanning method when you use the Carrier Sheet for scanning.
These are the following two modes.
•
Create facing pages in one image
Scans a document folded in two, in duplex mode and outputs an image of
facing pages joining the front and back images together. This mode is for
scanning a document larger than A4 size, such as A3/B4/11 x 17.
•
Create front and back images separately
Outputs a cropped image which fits the size of the scanned document.
This mode is for inserting and scanning documents such as photographs
which you do not want to scratch, or documents of irregular size such as
clippings of information that are difficult to load and scan directly on the
scanner, in the Carrier Sheet.
If both sides are scanned, the front and back images are generated
separately.
Output Image Size
Specifies an image size when generating a scanned image.
You can select it from the following document sizes.
ATTENTION
•
When scanning in [Create facing pages in one image] mode,
select [Duplex Scan] on the [Scanning] settings of [ScanSnap
Manager].
•
The method of loading documents differs with the mode. Refer
to "Loading Documents with the Carrier Sheet" (page 37) for
more details.
Mode: Create facing pages in one
image
Mode: Create front and back images
separately
Automatic Detection Automatic Detection
A3 (297 x 420 mm) -
- Carrier Sheet size (216 x 297mm)
- A4 (210 x 297mm)
- A5 (148 x 210mm)
- A6 (105 x 148mm)
- Post Card (100 x 148mm)
B4 (JIS) (257 x 364 mm) -
- B5 (JIS) (182 x 257mm)
- B6 (JIS) (128 x 182mm)
-
Letter (8.5 x 11in, 216
x
279.4 mm
）
11 x 17 (11 x 17 in, 279.4 x 431.8 mm) -