MB2147 – Installation Guide
Chapter 2 Setting up the Emulation System
MCU-AN-390070-E-V29
- 12 -
© Fujitsu Microelectronics Europe GmbH
2.1.4 C-pin switching
Depending on the microcontroller series SW3-S5/S6 has to be set.
Please refer to the graphic above and to Table 2-4, how to set the C-Pin.
SW3
S2
C-Pin Switching
S1
S2
S3
S4
S5
S6
Figure
C-Pin exists on V-Chip
*M *M *S *S
OFF ON
*S
P60/70 exist on V-Chip
*M
*M *S *S
ON OFF
*S
*M: see Main-Clock
*S: see Sub-Clock
Table 2-3: C-pin Switching
Please note that 3 Volts V-Chips (e. g. MB90V330) do not have a C pin and SW3-S5 has to
be set to ON and SW3-S6 to OFF. Please see table in chapter 5.1 for device list.
2.1.5 Example settings for MCU-series:
The following table shows the settings for some microcontroller series:
SW3
S2
V-Chip
Adapter
S1
S2
S3
S4
S5
S6
Figure
MB90V340
-102 / -104
(Dual Clock)
MB2147-20 OFF OFF OFF OFF OFF ON
Figure 2-4
MB90V340
-101 / -103
(Single Clock)
MB2147-20 OFF OFF ON ON OFF ON
Figure 2-5
MB90V390
MB2147-20 OFF OFF ON ON OFF ON
Figure 2-5
* see C-pin Switching
Table 2-4: Clock Supply
Sub-Clock-Setting S2:
Figure
2-3
Figure 2-4
Figure 2-5
