6.1.2.5 Tasks to Be Performed After Upgrade (Primary Node)
The tasks below need to be performed on the primary node.
1.
Stop the ETERNUS SF Manager services.
Use the Failover Cluster Manager to stop the transactions of ETERNUS SF Manager.
However, the shared disk for shared data of ETERNUS SF Manager must be online.
2.
Restore the operation environment of the previous version of the Storage Cruiser's manager.
Note that if step a and step b have already been performed, perform from step c.
a.
Log on to the server using Administrator privileges.
b.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Manager Program) (1/2)" for this version into
the DVD-ROM drive.
Refer to "DVD-ROM Contents" in the
ETERNUS SF Installation and Setup Guide
for this version for information on the DVD-
ROM structure and detailed contents.
c.
Implement restoration of the previous version.
Execute the following batch file. For
backupDir
, specify the directory in which the backup data is stored with an absolute
path. For
tmpDir
, specify a directory in which to temporarily place the files related to the performance management
function with an absolute path. When the performance management function is not backed up, it is unnecessary to specify
a directory for the
tmpDir
.
dvdromDrive:\Manager_windows\vuptools\esfpostinst_cluster.bat backupDir [tmpDir] -primary
When the restore fails, after confirming the output error message and removing the cause of the failure, execute the batch
again.
Point
-
Spaces and the characters " | : * ? / . < > , % & ^ = ! ; ( ) are not supported for directory names.
-
The number of characters in a directory name must be up to 220.
d.
Eject the DVD-ROM.
e.
If the SNMP Trap XML definition file is customized in the environment of the previous version, it is necessary to customize
this version as well.
Save the SNMP Trap XML definition file that is stored in the following directory to an arbitrary location.
After that, refer to "SNMP Trap XML Definition File" in the
ETERNUS SF Storage Cruiser Operation Guide
and customize the
SNMP Trap XML definition file. For the contents of the customization, refer to the SNMP Trap XML definition file which was
saved to the arbitrary location.
Directory of Location of Customization Definition files
$ENV_DIR\ESC\Manager\etc\opt\FJSVssmgr\current\snmpth
f.
If the polling service setting file is customized in the environment of the previous version, it is necessary to customize this
version as well.
Save the polling service setting file that is stored in the following directory to an arbitrary location.
After that, refer to "Polling Service Setting File" in the
ETERNUS SF Storage Cruiser Operation Guide
and customize the
Polling Service Setting file. For the contents of the customization, refer to the polling service setting file which was saved
to the arbitrary location.
Customization Definition files
$ENV_DIR\ESC\Manager\etc\opt\FJSVssmgr\current\polling\pollingService.xml
3.
If Managed Server transactions coexist in the clustered system, edit the environment setting files for AdvancedCopy Manager on
the shared disk for Managed Server transactions shared data, on the primary node for a target service.
On the primary node for target transactions, edit the following files:
- 52 -