Fujitsu ETERNUS SF Express V16.6 страница 326 Скачать руководство пользователя

Страница: 326 / 378

A.20 Restoring Common Control Repository (for Solaris, Linux)

Restore the common control repository.

Information

Notation in Procedure:

Directory Name

Explanation

$BAK_DIR

Backup destination directory.

Stop the ETERNUS SF Manager Web service.

Execute the following shell script to stop the service.

/opt/FJSVesfcm/bin/stop-webservice.sh

Restore the backup data. The following procedure must be implemented by a user with administrator privileges for the operating
system.

Execute the following command.

If you did not change the port number, specify 15432 for

portNumber

. If you did change the port number, specify the changed

port number for <

port number

/opt/FJSVesfcm/postgres/bin/psql -U esfpostgres -p portNumber postgres

The prompt is displayed, and waiting for input. Input the following strings in order.

master01!

drop database esfdb;

Execute the following command to restore the backup data.
If you did not change the port number, specify 15432 for

portNumber

. If you did change the port number, specify the

changed port number for

portNumber

The

backupFileName

is the file name specified when the backup data was created.

/opt/FJSVesfcm/postgres/bin/psql -U esfpostgres -p portNumber -f $BAK_DIR/Common/

backupFileName postgres

The prompt is displayed, and waiting for input. Input the following strings.

master01!

Start the ETERNUS SF Manager Web service.

Execute the following shell script to start the service.

/opt/FJSVesfcm/bin/start-webservice.sh

Note

After restoring the shared control repository, it takes approximately 2 minutes before Web Console becomes available.

A.21 Restoring License Management Database (for Windows)

Restore the license management database.

- 302 -

Содержание ETERNUS SF Express V16.6



























































































































































































































































































































































































Результаты поиска

Содержание ETERNUS SF Express V16.6

Отзывы:

Похожие инструкции для ETERNUS SF Express V16.6

Бренды по названию

Популярные бренды

Fujitsu ETERNUS SF Express V16.6, Руководство по миграции

Результаты поиска

Содержание ETERNUS SF Express V16.6

Отзывы:

Похожие инструкции для ETERNUS SF Express V16.6

Бренды по названию

Популярные бренды