Information
Notation in Procedure:
File Name / Directory Name
Explanation
$BAK_FILE
Backup file name for which an absolute path is specified
$INS_DIR
"Program Directory" specified at the ETERNUS SF Manager installation
The procedure is shown below:
1.
Stop the ETERNUS SF Express Tomcat service.
Open Service Control Manager to stop the following service.
-
ETERNUS SF Manager Tomcat Service
2.
Create backup data.
a.
If you did not change the port number, specify 15432 for
portNumber
. If you did change the port number, specify the
changed port number for
portNumber
.
The file name of the created backup data is $BAK_FILE.
$INS_DIR\Common\sys\postgres\bin\pg_dump -U esfpostgres -a --attribute-inserts -p
portNumber -t esccs.\"BASE_\"* -t esccs.\"REP_REPVOL\" -t esccs.\"BR_\"* -f $BAK_FILE esfdb
b.
The prompt is displayed, and waiting for input. Input the following strings.
master01!
3.
Start the ETERNUS SF Express Tomcat service.
Open Service Control Manager to start the following service.
-
ETERNUS SF Manager Tomcat Service
A.2 Backing Up Repository Data (for Solaris, Linux)
Save the repository data to the specified directory all at once.
Perform this operation on the Management Server (Storage Management Server).
Pre-Upgrade Environment Is Version 16.0 or Earlier
Note
-
Create a directory in which data is saved in advance.
-
Perform this operation as a root user.
-
Perform this operation with the locale specified when you installed the Management Server. If Symfoware has been installed in
advance, perform this operation with the locale specified at the time of installing Symfoware.
The procedure is shown below:
1.
Execute the following command.
# /opt/swstorage/bin/stgdbbackup
2.
The following message is displayed.
To continue processing, enter "y". To stop processing, enter "n".
////////////////////////////////////////////////////////////////////
AdvancedCopy Manager Storage Management Server ( **** )
- 274 -