For
srcDir
, specify the directory on the local disk from which to set the link.
For
dstDir
, specify the directory on the shared disk to which the link is to be set.
6.
Refer to "
7.
The shared disk for shared data of ETERNUS SF Manager must be offline.
Point
If the upgrade was terminated abnormally, refer to "
11.3.1 In Case of Problem During Upgrade of ETERNUS SF Manager (for Windows)
to recover the system to the normal state.
7.1.2.3 Performing Upgrade (Secondary Node)
1.
The shared disk for shared data of ETERNUS SF Manager must be online.
2.
Perform the upgrade for the secondary node.
The upgrade procedure is the same as that for the primary node. Refer to "
7.1.2.2 Performing Upgrade (Primary Node)
".
3.
The shared disk for shared data of ETERNUS SF Manager must be offline.
7.1.2.4 Tasks to Be Performed After Upgrade (Primary Node)
When the upgrade has been completed, the tasks below need to be performed on the primary node.
The shared disk for shared data of ETERNUS SF Manager must be offline.
1.
In the version level of this ETERNUS SF Manager, Symfoware is not used.
To upgrade from Version 16.1 or later, steps a, b, and g are not needed.
To upgrade from Version 16.0 or earlier, follow the procedures listed below to uninstall the Symfoware Server.
a.
Confirm that other products are not utilizing the Symfoware. If Symfoware is in use by another product, refrain from
uninstalling Symfoware.
b.
Uninstall Symfoware from the Add or Remove Programs or Programs and Features page.
If Symfoware Server and Symfoware Client are both installed, uninstall the Symfoware Client first.
c.
Restore the environment setting files (sys.properties) for AdvancedCopy Manager Copy Control Module.
Overwrite the environment configurations file (sys.properties) saved during "
7.1.2.2 Performing Upgrade (Primary
" onto the following file after upgrade installation.
Environment setting files for AdvancedCopy Manager Copy Control Module :
$INS_DIR\CCM\sys\sys.properties
d.
Evacuate the general script for the AdvancedCopy Manager CCM.
When general scripts are backed up in "
7.1.2.2 Performing Upgrade (Primary Node)
", restore the backed-up general scripts
to the directory stored in "Preparing General Scripts for AdvancedCopy Manager CCM", which corresponds to respective
operating systems and nodes described in the
ETERNUS SF Cluster Environment Setup Guide
of the appropriate earlier
version.
e.
Edit the environment setting files for AdvancedCopy Manager on the shared disk for ETERNUS SF Manager shared data.
Edit the following files: edit the following files:
-
<Drive of shared disk for shared data of ETERNUS SF Manager>:\etc\opt\swstorage\clsetup.ini
-
<Drive of shared disk for shared data of ETERNUS SF Manager>:\etc\opt\swstorage\etc\swstg.ini
Change the version information within each file, as follows:
Upgrade Patterns
Descriptive Contents of Version Information
Before
After
Version 16.0 to 16.6
Version=V16.0
Version=V16.6
- 91 -