Fujitsu ETERNUS LT40 S2, Установка, запуск и обслуживание

Страница: 12 / 110

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
12
Chapter 1
Product Description and Features
The ETERNUS LT40 S2/LT60 S2 LTO Library tape library provides a compact, high-capacity, low-cost solution for
simple, unattended data backup.
The ETERNUS LT40 S2 houses up to 24 tape cartridges in a compact 2U form factor with easy access to tape
cartridges via two removable magazines and a mailslot for importing and exporting cartridges. The library is
equipped with one or two half height LTO6, LTO7, or LTO8 tape drives or one full height tape drive.
The ETERNUS LT60 S2 houses up to 48 in a compact 4U form factor with easy access to tape cartridges via four
removable magazines and a mailslot for importing and exporting cartridges. The library is equipped with up
to four half height LTO6, LTO7, or LTO8 tape drives or up to two full height tape drives.
Each magazine can hold up to twelve cartridges.
The library does not occupy an own signal interface but is controlled via a separate LUN of one of the tape
drives.
The library can be operated via Operator Control Panel (OCP) or Remote Management Unit (RMU).
The ETERNUS LT40 S2/LT60 S2 LTO Library is compatible with most operating systems and environments that
support the SAS and Fibre Channel (FC) interface. However, the library requires either direct support from the
operating system or a compatible backup application to take full advantage of its many features.
Figure 1.1 ETERNUS LT60 S2 front and rear view