Fujitsu ETERNUS LT270 S2, Руководство пользователя - Управление панелью

Страница: 119 / 168

Chapter 3 Remote Panel Operation
3.11 Setting Library Information
FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation-
Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0
119
2
Set each item:
Table 3.32 Date and time setting items
3
Click the [OK] button after all settings are completed. To restore the conditions before the
settings, click the [Reset] button.
4
After clicking the [OK] button, the system displays a confirmation window showing the
input contents. Click the [OK] button if it is OK to proceed. To make entries again, click the
[Back] button.
5
If processing is completed, the system displays a window showing the processing results.
This completes the settings.
End of procedure
3.11.5 Setting the E-mail Function
The following explains how to set the e-mail function.
This function makes it possible to receive from the LT270 S2 e-mail notification about errors. To use the e-mail
function, it is necessary to set the source e-mail address, destination e-mail address, and SMTP server address.
Procedure
1
Click the [E-mail] button displayed under [Setup] in the menu frame to display the e-mail
setting window. If the e-mail function is already set, its values are displayed.
Setting item Explanation
Date (Month/Day/Year)
<required> Enter the date. Only numeric characters can be entered.
The allowed range of input: Month (1-12)/Day (1-31)/Year (2002-2037).
Time (Hour/Minute)
<required> Enter the time. Only numeric characters can be entered.
The allowed range of input: Hour (0-23)/Minute (0-59).
Timezone Set time zone.
• If a character that is not allowed or an out-of-range value is entered, an input error message is
displayed.
• For information on the Timezone setting, refer to Table 2.7 , "2.7.2 Time Setup" (page 48) .