manualshive.com logo in svg

Fujitsu ETERNUS LT260, Руководство пользователя, Страница: 44 / 84

Поделиться
Скачать
Fujitsu ETERNUS LT260 Скачать руководство пользователя страница 44

Chapter 2  Operating the Library
  2.5  Configuring the Library

FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-

Copyright 2016 FUJITSU LIMITED

P3AM-8802-04ENZ0

44

8

Click Next.

9

The Finish Configuration screen displays the proposed allocation of library resources into 
partitions.

•

To update the configuration, click Back.

•

To have the wizard configure partition as shown, click Finish.

•

After the wizard reconfigures the partition, the library will come on line automatically.

•

To exit the wizard, click Cancel or Exit.

End of procedure

2.5.13.2

 Using the Expert Partition Wizard

Click Configuration > Partition > Expert Wizard to start the wizard. The Create Partition Scheme screen lists the
current partitions, if any, and the free resources. Use the wizard to configure one partition at a time.

Procedure

1

To add a partition, click Add and then click Next.

2

Enter a name for the partition.

3

Select the number of barcode characters reported to the host application. 

This option provides interchange compatibility with libraries with more limited barcode reading capa-
bilities. The maximum length is 15 and the default is 8. This configuration will apply to all partitions.

You can use the Expert Partition Wizard to adjust the allocation of resources after creating the partitions with 
the Basic Partition Wizard. Moreover, you can enable or disable the drive auto cleaning function on the cre-
ated partitions.

If you want to enable or disable the mailslots, Cancel out of the wizard and update the mailslot configuration 
before configuring partitioning.

The Add button will only be active if there are available resources. If there are no available resources, 
either edit a partition and release resources from it or remove a partition that contains extra 
resources.

The industry standard length for LTO barcode labels is eight characters. Barcode labels longer than 
eight characters might scan incorrectly, particularly if they are not high quality labels.

Содержание ETERNUS LT260





















































































Отзывы:

Нет отзывов