Fujitsu ETERNUS LT20 S2, Установка, запуск и обслуживание

Страница: 99 / 118

ETERNUS LT20 S2
99
6 Servicing
6.1 Possible Tools Needed
To service a library you may need one or more of the following tools:
● Flat-blade screwdrivers (large and small)
●
Screwdriver for TX20 screws
● Cross-slot screwdriver
● Ground strap
6.2 Electrostatic Discharge
V
CAUTION. Static sensitive!
A discharge of static electricity can damage static-sensitive devices or
micro circuitry. Proper packaging and grounding techniques are
necessary precautions to prevent damage.
To prevent electrostatic damage, observe the following precautions:
Ê
Transport products in static-safe containers such as conductive tubes, bags,
or boxes.
Ê Keep electrostatic-sensitive parts in their containers until they arrive at
static-free stations.
Ê
Cover the library with approved static-dissipating material. Provide a wrist
strap connected to the work surface and properly grounded tools and
equipment.
Ê Keep the work area free of no conducting materials, such as ordinary plastic
assembly aids and foam packing.
Ê Make sure you are always properly grounded when touching a static-
sensitive component or assembly.
Ê Avoid touching pins, leads, or circuitry.
Ê
Use conductive field service tools.