Fujitsu ETERNUS LT20 S2, Установка, запуск и обслуживание

Страница: 92 / 118

92
ETERNUS LT20 S2
Tape Library Error Codes Troubleshooting
I
If Media Removal is set to Prevented and the interface connection between
host adapter and library or drive (SAS or FC) is diconnected, you have to
reboot the library. After reboot the
Media Removal
is reset to
Allowed
.
5.6 Tape Library Error Codes
If an error occurs during operation of the library, the library stops the current
operation and displays an error code on the LCD screen. Unless otherwise
noted in Table below, try to resolve the error by cycling power to the library and
retrying the last operation. If the error persists, contact support personnel.
5.6.1 Example Error Code
EVENT -6
A5 F1
Where:
– Sequence number -6 indicates the position in sequence list, 0 being the
most recent.
– Log shows a load error (code A5 = fan error, sub code F1 = caused by the
fan at the back connector plate).
The event log with the library also includes a date stamp for each event. Press
Enter to display the associated timestamp in the following format:
ddd:hh:mm:ss:HH
where:
ddd
days
hh hours
mm minutes
ss seconds
HH
1/100 second
A description of each error code and possible solution is provided in the
following table.