Fujitsu ETERNUS LT20 S2, Установка, запуск и обслуживание

Страница: 46 / 118

46
ETERNUS LT20 S2
Magazines Operating the LTO Library
4.3.2 Removing and Replacing a Magazine Using the
OCP
V
CAUTION
The magazine must only be removed manually in an emergency. Failure
to follow normal procedure can cause data loss and equipment damage.
This OCP option lets you gain access to the left and right magazine. Access to
the magazines may require the use of a password.
To remove a magazine:
1. From the Home Screen, press
Up
or
Down
on the OCP until the screen
displays Operations .
2. Press Enter to select.
3. Press Up or Down until the screen displays either
Unlock Left Magazine
or
Unlock Right Magazine
.
4. Press Enter to select the desired magazine to unlock.
5. Enter a password if requested.
6. The display will read Left Magazine Unlocked or Right Magazine
Unlocked
.
7. Pull the released magazine out of the library.
8. The screen will now display Insert Left Magazine or Insert Right
Magazine . The library cannot perform any other operation until the
magazine is replaced. After exchanging tapes in a magazine, slide the
magazine completely into the library. The magazine will lock into place once
it is correctly installed and the library will inventory the magazine.