Fujitsu Eternus DX80 S2, Руководство пользователя

Страница: 107 / 186

Appendix A Event Notification Message List
A.1 Message Format
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
107
A.1.3 SNMP
The ETERNUS DX Disk storage system supports three versions of SNMP: SNMPv1, SNMPv2c, and SNMPv3.
SNMPv3 supports MD5 and SHA as the authentication method and DES as the encryption method.
To monitor the ETERNUS DX Disk storage system using SNMP Trap, software that can receive and analyze
SNMP Traps must be used on the network.
This section describes the type and the notification format of Traps. For details on the messages that are
notified by SNMP Trap, refer to
"A.2 Message List" (page 112) .
For the display contents of events (SNMP Traps) when using the server management software "ServerView
Operation Manager" for monitoring the ETERNUS DX Disk storage system, refer to
"Appendix C Event (SNMP
Trap) Display When Using ServerView Operation Manager" (page 183) .
■ Trap type
There are two types of Traps: Generic Trap (standard Trap) and Specific Trap (extended Trap). Generic Trap is a
Trap that is defined by the SNMP protocol. Specific Trap is a Trap that has been created specifically for the
ETERNUS DX Disk storage system. The ETERNUS DX Disk storage system supports the following types of Traps:
●
Generic Trap (standard Trap)
7 Event type and
event code The message event type and the event code that are separated by a blank are output.
One of the following letters is output as an event type:
"P", "J", "M", "I", "R"
Event code is an 8-digit hexadecimal number according to the message.
Refer to
"A.2 Message List" (page 112) for details.
8 Message A message that indicates the event and its detailed information are output in text
format. For multiple process results, each process result is enclosed by brackets.
Refer to
"A.2 Message List" (page 112) for details.
No. Item Description
Trap No. Name Description
0 coldStart For an ETERNUS DX Disk storage system, this Trap is sent when the
controller starts up or restarts and when SNMP is set.
4 authentictionFailure An unauthorized access occurred.
6 enterpriseSepecific Extended Trap