Fujitsu ETERNUS DX60 S3, Руководство по настройке, Страница: 93 / 160

6.3.1 Remote Support (by AIS Connect) Setup
When using the remote support function by AIS Connect, perform the environment settings for connecting to
the remote server (AIS Connect server) in the remote support center.
•
If the REMCS function is being used, temporarily stop the REMCS function.
•
In EMEA&I region, the "Log Transmission" setting for the "Set E-Mail Notification" function may be ena-
bled ("Yes" is displayed). If this setting is enabled, disable it (select "No").
1
On the navigation of the ETERNUS Web GUI screen, click [System].
The [System] screen appears.
2
In [Category], click [AIS Connect] in [Remote Support].
The [Remote Support] screen appears.
3
Perform the environment settings for the AIS Connect function.
(1)
In [Action], click [Setup AIS Connect Environment].
The [Setup AIS Connect Environment] screen appears.
(2)
Select "Enable" for "AIS Connect" and then "Country code : Country name" for "Country of Installa-
tion (Country Code : Country Name)". Perform the other additional settings that are required.
(3)
Click the [Set] button.
A confirmation screen appears.
(4)
Click the [OK] button.
The AIS Connect settings are applied.
Chapter 6 Monitoring Settings
6.3 Remote Support Setup
93
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0