manualshive.com logo in svg

Fujitsu ETERNUS DX60 S3, Руководство по настройке, Страница: 59 / 160

Поделиться
Скачать
Fujitsu ETERNUS DX60 S3 Скачать руководство пользователя страница 59

●

For 2U

Figure 5.5 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit

Main line switch

5.2.2

Switching On and Off the PSU Switch on the Power Supply Unit

Move the PSU switches of the power supply unit in the controller enclosure and the drive enclosures to the
ON position (marked "|").

 

Make sure all of the PSU switches are in the ON position.

 

Figure 5.6 ON Position (Marked "|") of the PSU Switch on a Power Supply Unit

Power supply unit (PSU#0)

Power supply unit (PSU#1)

AC power is supplied to an enclosure.

•

For the controller enclosure, the POWER LED on the power supply unit blinks green.

Chapter 5 General Settings
5.2 Powering On
 

59

FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)

Copyright 2014 FUJITSU LIMITED

P3AM-9002-01ENZ0

Содержание ETERNUS DX60 S3

































































































































































Отзывы:

Нет отзывов