Fujitsu Eternus DX500 S3, Руководство по настройке

Страница: 31 / 151

2.3 Preparation and Setup for the Administration Terminal
The operation and management of the ETERNUS DX are performed by using a Web browser on the adminis-
tration terminal that is connected to the LAN for operation management.
Prepare and set up the administration terminal in advance.
Administration terminal preparation
Prepare the administration terminal that contains the following environment:
•
Web browser
Usable Web browsers are shown below. Using Web browsers other than the following is possible, but prop-
er operation is not guaranteed.
-
Microsoft Internet Explorer 7.0, 8.0, 9.0, 10.0 (desktop version), 11.0 (desktop version)
- Mozilla Firefox 3.6.x, ESR 10.0.x, ESR 17.0.x, ESR 24.0.x
Administration terminal setup
Check the settings of the Web browser on the administration terminal.
For details on the required settings, refer to "Configuration Guide (Web GUI)".
2.4 LAN Connection Preparation for Operation Management
2.4.1 LAN Related Specifications
■
Network Communication Protocols
The usable LAN ports and functions are different depending on the usage and protocol.
The following table shows how the LAN ports may be used (by usage and protocol).
Table 2.2 LAN Port Availability
Usage Protocol tcp / udp
Port
number
Direction
Master CM Slave CM
Remarks
MNT RMT MNT RMT
ETERNUS Web GUI http /
https tcp 80 / 443 from
¡ ¡ △
(*1)
△
(*1) Accessed
from a
Web
browser
ETERNUS CLI telnet /
ssh tcp 23 / 22 from ¡ ¡
△
(*1)
△
(*1) −
ftp (cli-
ent) tcp 21 to ¡ ¡
△
(*1)
△
(*1) −
SNMP agent snmp udp 161 from ¡ ¡ ¡ ¡ −
trap snmp
trap udp Must be
set to
¡ (*2) ¡ (*2)
´ ´ −
SMI-S http /
https tcp 5988 /
5989 from
¡
´ ´ ´ Used for
SMI-S cli-
ent com-
munica-
tion
Chapter 2 Checking the Configuration Environment
2.3 Preparation and Setup for the Administration Terminal
31
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0