manualshive.com logo in svg

Fujitsu Eternus DX200F, Руководство пользователя

Fujitsu Eternus DX200F - мощное устройство для хранения данных. На нашем сайте вы можете бесплатно загрузить пользовательское руководство для него. Получите детальную информацию о продукте, используя наше удобное руководство пользователя. Загрузить руководство вы можете на manualshive.com.

Поделиться
Скачать
background image

Chapter 6  Thin Provisioning Pool Management
  6.2  Create Thin Provisioning Pool

ETERNUS Web GUI User’s Guide (Settings)

Copyright 2015 FUJITSU LIMITED

P2X0-1270-13ENZ0

563

■

Manually selecting drives to create Thin Provisioning Pool

To create a new TPP manually, select Drive Type, RAID Level, and the drive that configures the TPP.

Requirements for selecting drives

•

The conditions for RAID groups in the TPP are as follows:

-

The RAID level (High Performance (RAID1+0) / High Capacity (RAID5) / High Reliability (RAID6) / High 
Reliability (RAID6-FR) / Mirroring (RAID1) / Striping (RAID0)) must be the same

-

The number of member drives in the RAID group must be the same

-

The drive type (Online/Nearline/SSD/Online SED/Nearline SED/SSD SED) must be the same
(If "Online" is selected for the drive type, "Online" type drives and "Nearline" type drives can be used in 
the same RAID group. However, using only "Online" type drives is recommended. If "Online SED" is 
selected for the drive type, "Online SED" type drives and "Nearline SED" type drives can be used in the 
same RAID group. However, using only "Online SED" type drives is recommended. This is because the 
available capacity and the access performance may be reduced when these drives are used in the same 
RAID group.)

-

When the RAID level is "High Performance (RAID1+0)" or "High Capacity (RAID5)", the drive must be 
smaller than 6TB (except SSDs and SSD SEDs)

•

The recommended drive configuration of the RAID group is shown as follows:

-

Select drives with the same capacity. If drives of different capacities exist in a RAID group, the smallest 
becomes the standard, and all other drives are regarded as the same capacity as the smallest drive. In 
this case, the remaining drive space is not used.

-

Select drives with the same speed. If drives of different speed exist in a RAID group, access performance 
of the RAID group may be affected.

-

SSD types vary depending on the interface speed (bandwidth). When manually specifying SSDs to be 
used, it is recommended to select SSDs with the same type (SSD-M/SSD/SSD-M SED). If SSDs of different 
types exist in a RAID group, access performance of the RAID group may be affected.

-

If the host connection environment does not support Advanced Format (AF), select non-AF-compliant 
drives (*1). If AF-compliant drives (*2) are selected, a data format conversion occurs and the drive 
access performance is reduced. When the host to be connected supports AF, both AF-compliant and 
non-AF-compliant drives can be selected.

*1:

Drives (such as 2.5" Online, 2.5" Nearline) where "AF" is not displayed for the type.

*2:

Drives (such as 2.5" Online AF, 2.5" Nearline AF) where "AF" is displayed for the type.

-

When "High Performance (RAID1+0)" or "Mirroring (RAID1)" is selected for the RAID level, allocate the 
drives (mirroring pair drives) by dividing them into two or more connection lines (for the ETERNUS 
DX500 S3/DX600 S3).

-

When "High Capacity (RAID5)", "High Reliability (RAID6)", or "High Reliability (RAID6-FR)" is selected for 
the RAID level, allocate the drives (multiple drives configuring a striping) by dividing them into two or 
more connection lines (for the ETERNUS DX500 S3/DX600 S3).

•

There are conditions for the ETERNUS DX8700 S3/DX8900 S3 drive layout. Refer to 

"Conditions for the 

ETERNUS DX8700 S3/DX8900 S3 drive layout" (page 528)

 for details. These conditions apply when the RAID 

level is "Mirroring (RAID1)", "High Performance (RAID1+0)", "High Capacity (RAID5)", "High Reliability 
(RAID6)", and "High Reliability (RAID6-FR)".

Содержание Eternus DX200F



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Eternus DX200F

iDance XD25 Instruction Manual preview
XD25
Бренд: iDance Страницы: 10
S.E.M. Fusion Z-7799 Quick Start Manual preview
Fusion Z-7799
Бренд: S.E.M. Страницы: 6
Teufel cinebase Technical Description And Operating Instructions preview
cinebase
Бренд: Teufel Страницы: 20
aija audio SUB LP210A User Manual preview
SUB LP210A
Бренд: aija audio Страницы: 4
Pyle PLMR7BTW Owner'S Manual preview
PLMR7BTW
Бренд: Pyle Страницы: 12
Panasonic SAPM38 - CD STEREO SYSTEM Operating Instructions Manual preview
SAPM38 - CD STEREO SYSTEM
Бренд: Panasonic Страницы: 48
Sharp CD-MPS600 Service Manual preview
CD-MPS600
Бренд: Sharp Страницы: 100
Sharp CD-SW440N Operation Manual preview
CD-SW440N
Бренд: Sharp Страницы: 16
Sharp cd-pc4900 Service Manual preview
cd-pc4900
Бренд: Sharp Страницы: 4
Sharp CD-SW440NH Operation Manual preview
CD-SW440NH
Бренд: Sharp Страницы: 34
Sharp CD-SW340 Operation Manual preview
CD-SW340
Бренд: Sharp Страницы: 40
Sharp CD-SW300 Operation Manual preview
CD-SW300
Бренд: Sharp Страницы: 44
Sharp CD-SW340H Operation Manual preview
CD-SW340H
Бренд: Sharp Страницы: 48
Sharp CD-SW300H Operation Manual preview
CD-SW300H
Бренд: Sharp Страницы: 48
Sharp CD-SW200E Operation Manual preview
CD-SW200E
Бренд: Sharp Страницы: 44
Sharp CD-RW5000 Operation Manual preview
CD-RW5000
Бренд: Sharp Страницы: 48
Sharp CD-SW200H Operation Manual preview
CD-SW200H
Бренд: Sharp Страницы: 56
Sharp CD-MPX110E Operation Manual preview
CD-MPX110E
Бренд: Sharp Страницы: 37

Бренды по названию

Популярные бренды

Загрузить еще бренды