Fujitsu Eternus DX200F, Руководство пользователя

Страница: 47 / 1082

Chapter 1 System Management
1.4 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
47
1.4.7 Register SED Authentication Key
This function registers the SED authentication key (common key) that is managed in the ETERNUS DX.
SEDs are used to prevent the leakage of the stored data when physically removed disks are stolen or lost.
The procedure to register SED authentication key is as follows:
Procedure
1
Click [Register SED Key] in [Action].
2
Click the [Register] button.

A confirmation screen appears.
3
Click the [OK] button.

The SED authentication key registration starts.
• The ETERNUS DX60 S3 does not support this function.
• Register the SED authentication key before installing SEDs in the ETERNUS DX. If a SED is installed
without registering the SED authentication key, data leakage in a SED that is removed may occur.
• If a SED is installed before registering the SED authentication key, register the SED authentication key
and reboot the ETERNUS DX.
• The SED authentication key can only be set once in the ETERNUS DX. The SED authentication key cannot
be changed or deleted after being set.
• Registering a common key is also required when the SED authentication key that is managed in the key
server is used.
After this function is executed, the SED authentication key is automatically generated and registered in the
SED.