manualshive.com logo in svg

Fujitsu Eternus DX200F, Руководство пользователя

Fujitsu Eternus DX200F - мощное устройство для хранения данных. На нашем сайте вы можете бесплатно загрузить пользовательское руководство для него. Получите детальную информацию о продукте, используя наше удобное руководство пользователя. Загрузить руководство вы можете на manualshive.com.

Поделиться
Скачать
background image

Chapter 3  Volume Management
  3.1  Create Volume

ETERNUS Web GUI User’s Guide (Settings)

Copyright 2015 FUJITSU LIMITED

P2X0-1270-13ENZ0

255

•

Creating SDPVs in RAID groups with the same RAID level, drive type, and number of drives is 
recommended.

•

For details on the setting items according to the drive type that is used, refer to 

"Setting items for each 

volume type when selecting "Automatic"" (page 258)

 or 

"Setting items for each volume type when 

selecting "Manual"" (page 259)

.

Creating TPV type volumes

Detailed information on creating TPV type volumes is provided below.

•

Volumes are created in TPP.

•

There are two methods to select a TPP; "Automatic" and "Manual".

•

When creating TPV type volumes, "Enable" the Thin Provisioning. Refer to 

"6.1 Set Thin Provisioning" (page 

557)

 for details.

•

The maximum total capacity of TPV that can be created in the ETERNUS DX depends on the maximum pool 
capacity specified with the [Set Thin Provisioning] function. Refer to 

"Maximum pool capacity for each 

model" (page 557)

 for details.

To check the current maximum pool capacity, use the [Settings (Thin Provisioning)] function. Refer to "Set-
tings (Thin Provisioning)" in "ETERNUS Web GUI User’s Guide (Operation)" for details.

•

For details on the setting items, refer to 

"Setting items for each volume type when selecting "Automatic"" 

(page 258)

 or 

"Setting items for each volume type when selecting "Manual"" (page 259)

.

Creating WSV type volumes

Detailed information on creating WSV type volumes is provided below.

•

The only available selection method for RAID groups is "Manual".

•

The conditions for RAID groups to configure WSVs are as follows:

-

The RAID level (RAID1+0/RAID5/RAID6/RAID5+0/RAID1/RAID0) must be the same

-

The number of member drives in the RAID group must be the same

-

The Stripe Depth value must be the same

-

The drive type (Online/Nearline/SSD/Online SED/Nearline SED/SSD SED) must be the same
(Since the access performance of WSVs is reduced, selecting the same drive type for the "Drive Type" in
the "Select RAID Group Information" field is recommended. Selecting "Online/Nearline" and "Online
SED/Nearline SED" is not recommended.)

-

The SSD type (SSD-M/SSD/SSD-M SED) must be the same
(Since the access performance of WSVs is reduced, using the same SSD type is recommended. The SSD
type that configures a RAID group can be checked in the [RAID Group Detail] screen ([Drive] tab).)

-

The disk speed must be the same
(RAID groups configured with different speed drives can be selected. Note that this reduces the access
performance for WSVs. It is recommended to select the same speed disks. The speed of the drives that
configure a RAID group can be checked in the [RAID Group Detail] screen ([Drive] tab).)

-

The key group setting state must be the same
(If the drive type is "Online SED", "Nearline SED", "SSD SED", or "Online SED/Nearline SED", RAID groups
can be selected regardless of the key group setting (enabled or disabled). However, selecting the same
key group setting state is recommended. The key group setting state can be checked with the
"Encryption" field in the [Select RAID Groups] screen.)

-

The sequential unused area must be the same size or bigger than the capacity of the volumes that are 
to be concatenated

•

The number of concatenated RAID groups is from 2 to 64.

•

The WSV capacity is from 24MB to 128TB.

Содержание Eternus DX200F



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Eternus DX200F

RCA RS2533 User Manual preview
RS2533
Бренд: RCA Страницы: 20
Blaupunkt MS8BK Owner'S Manual preview
MS8BK
Бренд: Blaupunkt Страницы: 70
TIL TDAP-611 Operating Instructions Manual preview
TDAP-611
Бренд: TIL Страницы: 18
Devialet ARCH Manual preview
ARCH
Бренд: Devialet Страницы: 14
Chal-tec 10007041 Manual preview
10007041
Бренд: Chal-tec Страницы: 11
Crosley Crosley Coloradio CR52 Instruction Manual preview
Crosley Coloradio CR52
Бренд: Crosley Страницы: 2
Curtis iP1490 Owner'S Manual preview
iP1490
Бренд: Curtis Страницы: 21
Crystal Sound DCS-210 Instruction preview
DCS-210
Бренд: Crystal Sound Страницы: 2
DS Produkte Vitalmaxx 01151 Instruction Manual preview
Vitalmaxx 01151
Бренд: DS Produkte Страницы: 40
THOMSON MS4300 User Manual preview
MS4300
Бренд: THOMSON Страницы: 23
Ednet 83173 Manual preview
83173
Бренд: Ednet Страницы: 4
LG OK75 User Manual preview
OK75
Бренд: LG Страницы: 9
Blue Smoke THE BLACK BOX User Manual preview
THE BLACK BOX
Бренд: Blue Smoke Страницы: 31
Aiwa NSX-TR99 Service Manual preview
NSX-TR99
Бренд: Aiwa Страницы: 95
Aiwa NSX-D77 Operating Instructions Manual preview
NSX-D77
Бренд: Aiwa Страницы: 27
Aiwa XR-AVH1200 Service Manual preview
XR-AVH1200
Бренд: Aiwa Страницы: 27
Bush CMC361DABBT Instruction Manual preview
CMC361DABBT
Бренд: Bush Страницы: 16
RCA RP-9316 Specifications preview
RP-9316
Бренд: RCA Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды