Chapter 1 System Management
1.8 Network Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
113
1.8.4
Setup SNMP Manager
This function specifies the IP address of the SNMP Manager.
The SNMP Manager is used when accessing the ETERNUS DX using the community name or the user name, or
when sending a trap from the ETERNUS DX to the SNMP Manager.
Up to ten SNMP Managers can be specified for each ETERNUS DX.
For details on the parameters for this function, refer to
"A.1.7.4 Setup SNMP Manager" (page 711)
For the factory default settings for this function, refer to
"Appendix B Setup SNMP Manager" (page 980)
.
The procedure to set the SNMP Manager is as follows:
Procedure
1
Click [Setup SNMP Manager] in [Action].
2
When adding a Manager IP address, click the [Add] button. Click the [Manager] link to edit
the Manager IP address.
The [Manager] screen appears.
•
If the "SNMP Function" is disabled, this function cannot be used.
•
The IP address of the SNMP Manager that is used in the settings in
"1.8.7 Setup SNMP Agent Community"
or
"1.8.8 Setup SNMP Agent Trap" (page 123)
cannot be changed or deleted.
•
When SNMP Manager exists in a different subnetwork from where the ETERNUS DX belongs, specify the IP
address or the network address of SNMP Manager in "Allowable IP Address" using the procedure in
Setup Network Environment" (page 97)
To delete the existing Manager IP address, click the [Delete] button for the target IP address.
Содержание Eternus DX200F
Страница 2: ...This page is intentionally left blank ...
Страница 1082: ......