Fujitsu ETERNUS CS800 S6 Скачать руководство пользователя

Страница: 26 / 561

2.2 Features and Benefits

The NAS and OST presentation are available on all ETERNUS CS800 models. The VTL
presentation is available on models with FC (Fibre Channel) option.

2.2

Features and Benefits

The ETERNUS CS800 system provides the following features and benefits:

Leading performance and scalable capacity.

Inline data flow provides leading deduplication with an optimal combination of total
system performance, manageability, and value.

LAN/WAN replication to up to two targets and with up to 10 sources per target.

High throughput connectivity options (10 GbE and 8 Gb Fibre Channel).

Flexibility of VTL, NAS and OST presentation layers.

Virtual Tape Library (VTL) presentation layer (all models with Fibre Channel option).

Supported by every major backup software vendor.

Tape drives emulated:

IBM LTO-1,LTO-2, LTO-3, LTO-4, or LTO-5

HP LTO-1,LTO-2, LTO-3, LTO-4, or LTO-5

Libraries emulated:

Fujitsu CS-TL

ADIC Scalar i2000, or ADIC Scalar i500

NAS presentation layer for NFS and CIFS/SMB.

OST presentation layer for Symantec NetBackup and BackupExec. Supports also the OST
features

Optimized Duplication

Direct to Tape

Synthetic Fulls

OST Accent

Oracle RMAN™ support for Oracle 11.

LDAP/AD support.

Path to tape (PTT) support for direct copy of backup data to a physical tape library,
supported by the major backup applications, e.g.:

Symantec™ NetBackup™ (with VTL and OST implementations)

Symantec™ Backup Exec (with OST implementations)

Oracle

Secure Backup

ETERNUS CS800

Содержание ETERNUS CS800 S6


















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ETERNUS CS800 S6

Отзывы:

Похожие инструкции для ETERNUS CS800 S6

Бренды по названию

Популярные бренды

Fujitsu ETERNUS CS800 S6, Руководство пользователя

Результаты поиска

Содержание ETERNUS CS800 S6

Отзывы:

Похожие инструкции для ETERNUS CS800 S6

Бренды по названию

Популярные бренды