Fujitsu ETERNUS CS800 S6, Руководство пользователя

Страница: 244 / 561

10.4 OST Configuration
4. If Automatic Image Replication is enabled, select the replication target you want to
replicate images to. (You can select only a single target.) When images are replicated,
data will be sent to the selected target.
5. If Automatic Image Replication is enabled, specify the following information:
Remote Storage Server Name The name of the remote storage server (on the target
ETERNUS CS800) to replicate data to. The source
ETERNUS CS800 and target ETERNUS CS800 must
reside in different NetBackup domains.
To configure the target ETERNUS CS800, see
"Replication Send" on page 347 .
Remote LSU Name The name of the LSU in the remote storage server
that will receive the replicated data.
Remote User The OST user credentials to use for authentication on
the remote (target) ETERNUS CS800. The selected
remote user
must match a local user on the
Configuration > OST > Manage Users page on the
target ETERNUS CS800 (see "Manage Users " on page
331 ).
6. Click Apply .
Deleting an LSU
Delete an LSU if it is no longer needed. When you delete an LSU, all data stored on the
LSU is lost.
If you deleted the LSU from Symantec NetBackup or Symantec Backup Exec, you
must wait several minutes before deleting the LSU from the ETERNUS CS800.
To delete an LSU:
1. Select the LSU in the Logical Storage Unit List .
You cannot delete an LSU if it has more than zero currently active connections. The
number of active connections is displayed on the
LSU page (see "Logical Storage Unit
List" on page 239 ).
You can select multiple LSUs to delete at once.
2. (Optional) Select the Force Delete LSU check box to delete LSUs that are not empty.
Normally, you cannot delete an LSU if it contains existing backup images. If for some
reason you cannot remove files from the LSU, selecting the
Force Delete LSU check box
allows you to delete the LSU even though it is not empty.
3. Click Delete .
ETERNUS CS800 244