Fujitsu ETERNUS CS800 S5, Руководство пользователя

Страница: 260 / 634

OST Configuration
246
U41840-J-Z125-7-76
●
LSUs - The number of logical storage units (LSUs) that have been added to the system
(see "LSU" on page 251 ).
●
OST Service - The OST service can be in Ready, Stopped or Verifying state.
The OST server is available for backup only in Ready state.
●
Name - The name of the storage server.
●
LSUs - The number of LSUs that have been added to the storage server.
●
Max Connections - The maximum number of connections allowed to the storage
server.
●
Active Connections - The number of currently active connections to the storage
server.
●
Backup Images - The number of backup images on the storage server.
●
Optimized Duplication - The status of Concurrent Optimized Duplication for the
storage server ( Enabled or Disabled ), as well as the configured targets (if any).
●
Description - A brief description of the storage server (if available).
I
Click a column heading to sort the rows in the table by that column. Click the column
heading again to reverse the sort order.
I
The connections of a storage server that are used equals the data streams plus one
for each LSU polling. A backup job may generate more than one data stream if the
data can be read in parallel. For example, a policy that is backing up A, B, C, and
D, drives of a Windows system can generate four data streams in parallel.
Adding a Storage Server
Add a storage server to present the storage capacity of the ETERNUS CS800 as LSUs that
are compatible with backup applications that support OST. You can add up to 100 storage
servers. When adding a storage server, you must also add an LSU to the storage server.
(For more information about LSUs, see
"LSU" on page 251 .)
I
Data on storage servers is always deduplicated.
To add a storage server:
1. Click Add .
The Add Storage Server page displays (see Figure 153 ).