manualshive.com logo in svg

Fujitsu ETERNUS AF250, Руководство пользователя, Страница: 211 / 423

Поделиться
Скачать
Fujitsu ETERNUS AF250 Скачать руководство пользователя страница 211

Chapter 4  Volume Status
  4.6  Reservation

ETERNUS Web GUI User’s Guide (Operation)

Copyright 2016 FUJITSU LIMITED

P2X0-1260-19ENZ0

211

4.6

Reservation

This function displays the reservation status of the volumes that are specified by a host.

The following items are displayed in the Main area:

•

No.
The volume number is displayed. Click this item to display the [Volume Detail] screen.
Refer to 

"4.12 Volume Detail (Reservation)" (page 232)

 for display items.

•

Name
The volume name is displayed. Click this item to display the [Volume Detail] screen.
Refer to 

"4.12 Volume Detail (Reservation)" (page 232)

 for display items.

•

LUN Group
When the host affinity setting is specified for a host that reserves the volume, the LUN group name is
displayed. If the host, ports, and LUNs are directly allocated (mapped), the location information (x: CE
number, y: CM number, z: CA number, w: Port number) of the ports is displayed.
When the volume is not reserved, a "-" (hyphen) is displayed.

-

LUN group name

-

For the ETERNUS DX8700 S3/DX8900 S3
CE#x CM#y CA#z Port#w

-

For the other models
CM#y CA#z Port#w

•

Host LUN
The host LUN, which is allocated to the volume, is displayed.
When the volume is not reserved, a "-" (hyphen) is displayed.

•

Registrant Count
The number of reservation keys registered in the volume is displayed.

The reservation status for volumes where the usage is "Block" and "Block/Dedup" is displayed. Refer to 

"4.1 

Volume (Basic Information)" (page 194)

 for details.

Содержание ETERNUS AF250








































































































































































































































































































































































































































Отзывы:

Нет отзывов