Fujitsu ESPRIMO P5 Series Скачать руководство пользователя страница 44

Страница: 44 / 52

Troubleshooting and tips

The device cannot be switched off with the On/Off switch.

Cause

Troubleshooting

System crash

►

Press the On/Off switch for at least
4 seconds, until the device switches off.

Attention: Warning, this could lead to a loss of
data!

The Operating System is not shut-down properly
in the process. Error messages are therefore
possible the next time the system is booted.

Monitor remains blank

Cause

Remedy

Monitor is switched off

►

Switch your monitor on.

Power saving has been activated (screen is
blank)

►

Press any key on the keyboard.

►

Deactivate the screen saver. If
necessary, enter the appropriate
password.

Brightness control is set to dark

►

Adjust the brightness control. For detailed
information, please refer to the operating
manual supplied with your monitor.

Power cable not connected

►

Switch off the monitor and the device.

►

Check that the monitor power cable is
properly connected to the monitor and to
a grounded mains outlet or to the monitor
socket of the device.

►

Check that the device power cable is
properly plugged into the device and a
grounded mains outlet.

►

Switch on the monitor and the device.

Monitor cable not connected

►

Switch off the monitor and the device.

►

Check that the monitor cable is properly
connected to the device and monitor.

►

Switch on the monitor and the device.

Incorrect setting for the monitor

►

Restart the system.

►

Press

while the system is booting.

►

Start the system in Safe Mode.

►

Set up the monitor as described in the
documentation for your operating system
and monitor.

Fujitsu

Содержание ESPRIMO P5 Series





















































Результаты поиска

Содержание ESPRIMO P5 Series

Отзывы:

Похожие инструкции для ESPRIMO P5 Series

Бренды по названию

Популярные бренды

Fujitsu ESPRIMO P5 Series, Руководство по эксплуатации

Результаты поиска

Содержание ESPRIMO P5 Series

Отзывы:

Похожие инструкции для ESPRIMO P5 Series

Бренды по названию

Популярные бренды