Fujitsu ESPRIMO G558, Руководство по эксплуатации

Страница: 26 / 38

Operation
Operation
Switch the device on
► If necessary, switch the monitor on (see the operating manual for the monitor).
Device, Monitor,
► Press the ON/OFF switch on the front of the device.
The power indicator lights up and the device starts.
Switching off the device
► Shut down the operating system in the proper way. In Windows: from the
Start
menu select the
Shut Down
option.
Device, Monitor,
► If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
If the device is switched off, it consumes a minimum of energy.
The ON/OFF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage, remove the power plug from the power socket.
► If necessary, switch the monitor off (see the operating manual for the monitor).
Procedure in an emergency
If the device cannot be switched off, you can force a shutdown by
using the following emergency procedure.
Warning, this could lead to a loss of your data!
► Press the ON/OFF switch for at least 4 seconds.
The device switches itself off.
The next time you restart the device, error messages may occur due to improper switching off.
Settings in the BIOS setup
In the BIOS setup, you can set system functions and the hardware con fi guration of the
device. At delivery, the default entries are effective (see BIOS manual or mainboard
manual). You can customize these settings in the BIOS setup.
22 Fujitsu