manualshive.com logo in svg

Fujitsu eclipse, Руководство по эксплуатации, Страница: 29 / 76

Поделиться
Скачать
Fujitsu eclipse Скачать руководство пользователя страница 29

MDE-3893P Encore® and Eclipse® Series Owner’s Manual · December 2011

Page 25

Call Gilbarco First

Preparing to Service Units

Call Gilbarco First

Before calling an ASC/CSC, call the Gilbarco Help Desk at 1-800-800-7498. The Help Desk 
may be able to resolve the issue for you.

Service Preparation

Use an ASC/CSC to efficiently service and maintain your Encore and Eclipse units. Gilbarco 
trains and certifies ASCs/CSCs to service and maintain Encore and Eclipse units in a safe 
manner. Warranty service must be performed by an ASC/CSC only.

Before Making a Service Call

Before you make a service call, perform the following tasks:

• Obtain complete information from station personnel about the problem. Provide any 

history that may help (whether the unit has a recurring problem, or the problem has been 
observed for the first time, and so on).

• Mention the associated hose number(s) along with the problem.
• Confirm that the tank has fuel.
• Confirm that the power, pump lights, and circuit breakers are on.
• For electronic units, write down and report any error codes displayed.

Note: For information on recording and clearing error codes, refer to 

“Error Codes”

 on 

page 29

.

Description of the Problem

Provide the ASC/CSC with a complete and accurate description of the problem, including all 
symptoms and error codes. Ensure that you give the service personnel as complete and 
accurate information as possible. It will help ensure faster and potentially less costly repairs 
and keep downtime costs to a minimum.

Warranty Service

All warranty service must be performed by an ASC/CSC. Failure to use an ASC/CSC 
to perform warranty service could result in loss of warranty coverage.

IMPORTANT INFORMATION

Station Security

In any manufacturer’s unit, it may be impossible, even with a detailed security arrangement, 
to stop a knowledgeable, unobserved, and experienced thief. It is possible to reduce the 
probability of a theft attempt, if security measures are designed into the station layout and 
security-minded actions are planned into the site’s operation. The following recommendations 
are intended to decrease the probability of theft by observance and/or incorporating obstacles 
that deter criminal activity.

Содержание eclipse













































































Отзывы:

Нет отзывов