background image

BX2560 M2

D3320 - BIOS Setup Utility

57

Server Mgmt menu

Pressing the 

[+]

 key or the 

{-}

 key increases or decreases this value.

Temperature Monitoring

 

Specifies whether the system is disabled if the ambient temperature or 
the temperature of a processor exceeds the critical value. This protects 
against damage to the system or data. If the operating system has an 
active server management process, it takes over the temperature 
monitoring function and shuts the system down if the temperature values 
reach a critical level.

Depending on the 

Boot Retry Counter

, the system is enabled again after 

the time set under 

ASR&R Boot Delay

 has expired. The system should 

have cooled down again during this period.

Disabled

 

The system does not switch off itself if the temperature exceeds 
the critical value.

Enabled

 

The system switches off itself if the temperature exceeds the 
critical value.

Event Log Full Mode

 

Specifies whether or not the System Event Log can be overwritten.

Overwrite

 

If the System Event Log is full, additional events overwrite the 
oldest entries in the System Event Log. In this case, newer events 
are more important than older events.

Maintain

 

If the System Event Log is full, no further events are entered. The 
System Event Log file must be cleared first before additional 
events can be entered. In this case, older events are more 
important than newer events.

Load iRMC Default Values

 

Specifies whether the iRMC default values are loaded or not.

No

 

No action is taken.

Содержание D3320 PRIMERGY BX2560 M2

















































































Отзывы: