Fujitsu D2912, Руководство по биосу, Страница: 61 / 72

Security Menu - Security features
ATA Vulnerability Protection
Provides extended protection against access attempts to ATA hard disks.
Standard
This setting causes the hard disk to operate using the standard factory settings.
Standard settings should be selected before con
fi guring the hard disk (e.g. hard
disk password, silent mode, SMART, ...).
Enhanced
The hard disk can be set to use a protected mode that modi fi es the
security-related functions so they are not identical to the original default settings.
Some special low-level hard disk con
fi guration programs may not function if
this setting is selected.
The system must be restarted for any changes to take effect.
Diskette Write – Write protection for floppy disk drive
Floppy diskdrive Writeprotection
This fi eld is used to enable and disable fl oppy disk write protection.
Enabled
Diskettes can be read, written to or deleted if the appropriate option (see manual
for the mainboard) is set accordingly.
Disabled
Diskettes can only be read.
Flash Write – System BIOS write protection
SystemBIOS,writeprotection Writeprotection FlashBIOSupdate
This fi eld can assign write protection to the system BIOS.
Enabled
The system BIOS can be written to or deleted if the corresponding switch (see
manual for the mainboard) is set accordingly. Flash BIOS update is possible
Disabled
The System BIOS can neither be written to nor deleted. Flash BIOS update is
not possible
Cabinet Monitoring – Protection after
opening the case
Enabled
You can only continue using the device after opening the casing by entering the setup
password.
Disabled
The device also continues working normally with the casing open. No password is
required.
Fujitsu Technology Solutions 57