Fujitsu D2912, Руководство по биосу

Страница: 45 / 72

Security Menu - Security features
Set Supervisor / User Password
Password Password Supervisorpassword Userpassword
The supervisor password prevents unauthorized call up of
BIOS Setup
. Only those
who know the supervisor password can call up
BIOS Setup
. You must also set a
supervisor password to make the user password effective.
The password must be four to eight characters in length. All alphanumeric
characters can be used; no distinction is made between upper and lower case.
The password will not be displayed during entry. Please contact Customer
Services for assistance if you forget your password.
► To set or change the supervisor/user password, proceed as follows:
► Open
BIOS Setup
and select the
Security
menu.
► Highlight the
Set Supervisor Password
or
Set User Password
fi eld and press the Enter key.
When a password has been set, you will be asked to enter it:
Enter Current Password
You are asked to enter the new password:
Confirm New Password
► Enter the password again and press the Enter key.
The new password is saved.
Changes have been saved [Continue]
For the supervisor password:
You can now choose whether you want the supervisor password just to prevent
BIOS Setup
being opened, or if you also want to block access to the settings
for any boards installed that have their own BIOS.
► To just block access to
BIOS Setup
, mark the
Setup Password Lock
fi eld and select the
Standard
entry.
► To also block access to settings for installed boards that have their own
BIOS (in addition to preventing
BIOS Setup
from being opened), mark the
Setup Password Lock
fi eld and select the value
Extended
.
For the user password:
► To prevent booting of the operating system, mark the
Password on boot
fi eld and select the value
Enabled.
► From the
Exit
menu, choose the option
Save Changes & Exit
.
The device restarts and the new supervisor/user password becomes effective.
Fujitsu Technology Solutions 41