Fujitsu D2912 Скачать руководство пользователя страница 40

Страница: 40 / 72

Advanced Menu – Advanced system configuration

Power-on wait time

Maximum time for the Alert Sending Device (ASD) to establish the connection to its transfer medium.

AMT Sub-Menu

enables con

guration and display of the Intel Advanced Management

Technology® (iAMT) parameters.

ME Firmware Status

Indicates the actual status of the Management Engine (ME).

Disabled

The ME system is not available.

Enabled

The ME system is under way.

Platform Manageability

Indicates the current status of the ME sub-system.

None

The ME system is not active.

AMT

The ME system is set to AMT mode.

ASF

The ME system is set to ASF mode.

Not Active

The ME system is deactivated.

ME FW Version

Version of the ME

rmware.

Disabled

If the ME

rmware status is deactivated.

Error

If an error occurs when reading the

rmware version.

FW Version

The version of the ME

rmware.

AMT SKU

Indicates which type of

rmware is currently loaded.

Disabled

If ME

rmware status is deactivated.

Error

If an error has occurred when reading the FM SKU.

AMT+ASF

The ME FW image contains both the AMT part and the ASF part.

ASF

The ME FW image contains only the ASF part.

–

The ME FW image contains both the AMT part and the ASF part.

Fujitsu Technology Solutions

Содержание D2912









































































Результаты поиска

Содержание D2912

Отзывы:

Похожие инструкции для D2912

Бренды по названию

Популярные бренды

Fujitsu D2912, Руководство по биосу

Результаты поиска

Содержание D2912

Отзывы:

Похожие инструкции для D2912

Бренды по названию

Популярные бренды