
Advanced Menu – Advanced system configuration
Peripheral configuration – Ports and controllers
Peripheralcon
fi
guration
Port
Controller
Opens the submenu used to adjust settings for ports and controllers.
Peripheral Configuration
Item Specific Help
Serial 1:
[Auto]
[Enabled]
Configure serial port
using options
[Disabled]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
Audio Controller:
[Enabled]
LAN Remote Boot:
[Enabled]
Diskette Controller:
USB Devices:
USB Ports:
[Enabled]
[All]
Serial 2:
[Disabled]
[Disabled]
Parallel port:
[Enabled]
USB Host Controller:
USB BIOS Hot-Plug:
[Enabled]
Beep Volume:
[High]
Example showing the
Peripheral Configuration
menu
Serial 1/Serial 2 – Serial ports
This
fi
eld selects the address and the interrupt used to access the corresponding serial port.
Enabled
The serial port is set to the indicated address and interrupt. If you select Enabled,
additional lines are displayed for the con
fi
guration settings.
Disabled
The serial port is disabled.
Auto
The serial interface will be selected automatically by the BIOS or operating system.
Parallel port (system-dependent)
Sets the address and interrupt for access to the parallel port.
Enabled
The parallel port is set to the address and the interrupt shown here. If Enabled is
selected, additional lines are displayed for setting the con
fi
guration.
Auto
The parallel port is automatically set to the next available combination (address,
interrupt).
Disabled
The parallel port is disabled.
20
Fujitsu Technology Solutions
Содержание D2912
Страница 1: ...Components Description BIOS manual ...
Страница 3: ......