Fujitsu D2912, Руководство по биосу

Страница: 21 / 72

Main Menu – System functions
HD-ID
The hard disk ID number is displayed during POST and when the password is requested.
Boot Features – System boot
Systemboot Bootroutine
Opens the submenu used to select system boot settings for the device.
Boot Features
Item Specific Help POST Errors: [Halt On All Errors]
Fast Boot: [Enabled]
Boot Menu:
[Disabled]
Pauses and displays
SETUP entry or resume
boot prompt if error
occurs on boot. If
disabled, system
always attempts to
boot
POST Diagnostic Screen:
[Enabled]
SM Error Halt: [Disabled]
POST Errors – Aborting system boot
Self-test Systemboot Bootroutine
De fi nes whether the system boot process is aborted and the system halted when an error is detected.
Halt On All
Errors
If the self-test detects an error, system boot is aborted after the self-test and the
system is halted. The system boot can be continued by pressing the F1 key.
No Halt On
Any Errors
System boot is not aborted. The error will be ignored, as far as possible.
SM Error Halt
Con fi gures the system behaviour during the self-test if a system monitoring error is ascertained
by the System Monitoring Device (e.g. fan monitoring, temperature monitoring).
Enabled
If the system monitoring device reports a fan error to BIOS, the system boot is
cancelled and the system stopped after the self-test.
Disabled
The system boot is not cancelled if the system monitoring device reports a
miscellaneous error to BIOS. In this case, only an error message is displayed.
Fast Boot – Quick Self-test
can reduce the scope of the self-test and thus accelerate the start-up of the system.
Enabled
When the device is switched on, the quick self-test is carried out, in which e.g. the
fl oppy disk drives are not checked.
Disabled
When the device is switched on the complete self-test is carried out.
Fujitsu Technology Solutions 17